Switch Dell EMC S5296F-ON

Dell EMC PowerSwitch S5212F-ON

Modernize Computing, Storage, and Interaction HCI with this half-width switch 1RU ToR
12 ports x25GbE SFP28 and 3 ports x100GbE QFSP28
supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.

Dell EMC PowerSwitch S5224F-ON

Optimize connectivity, cost and performance with this switch ToR, which has 24 ports X 25GbE SFP28 and 4 ports X 100GbE QSFP28. S5224F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.

Dell EMC PowerSwitch S5232F-ON

32 port 100GbE QSFP28
S5232F-ON also supports Open Network Install Environment (ONIE) to install zero-touch network operating systems.

Dell EMC PowerSwitch S5248F-ON

Optimal flexibility and cost-effectiveness for complex computing and traffic storage environments
48 ports X 25GbE SFP28, 4 port X 100GbE QSFP28 and 2 ports x 100GbE QFSP28-DD.
S5248F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.

Dell EMC PowerSwitch S5296F-ON

Double the number of direct ports 25GBE using a switch ToR
96 ports X 25GbE SFP28 and 8 ports X 100GbE QSFP28.
S5296F-ON also supports Open Network Install Environment (ONIE)to install zero-touch network operating systems.

routing

Full-featured switching and routing of the second and third layers

VLAN

Network tags VLAN, GVRP

Other switching options

Open Networking

Control

Command line interface
SNMP
Interfaces REST API

Supported standards

IEEE — 802.1, 802.3
RFC — IP, IPv4, IPv6, RIP, OSPF, IS-IS, BGP, multicast race Lka, safety, Data Center Bridging, Network management

Operating conditions

Operating temperature: from 0 to 45 В°C (from 32 to 113 В°F)
Operating Humidity: from 10 to 85% (relative humidity), non-condensing

Nutrition

100–240 V AC, 50/60 Hz

Interference immunity

EN 300 386 V1.4.1:2008 "EMC for network equipment", EN 55024:1988 + A1:2001 + A2:2003, EN 61000-3-2 "Sinusoidal current emission limits", EN 61000-3-3 "Limitation of voltage ripple and flicker", EN 61000-4-2 "Electrostatic discharge immunity test", EN 61000-4-3 "RF electromagnetic field immunity", EN 61000-4-4 Immunity test for fast transients and bursts, EN 61000-4-5 Immunity test for surge voltage, EN 61000-4-6 Immunity to conducted disturbances induced by radio frequency electromagnetic fields".

RoHS

All components of the series S comply with the directive RoHS EU

radiation/Security

Security
W>second edition UL/CSA 60950-L, second edition EN 60950-1 second edition IEC 60950-1, including all national standard deviations and group differences, EN 60825-1 "Safety of laser products. part 1. Equipment classification, requirements and user manual", EN 60825-2 "Safety of laser devices. part 2. Safety of fiber-optic communication systems", requirements FDA 21 CFR 1040.10 and 1040.11

radiation
Australia/New Zealand: ASNZS CISPR 22:2006, m, Class A; Canada: ICES-003, issue 4, class A; Europe: EN 55022:2006 + A1:2007 (CISPR 22:2006), Class A; Japan: VCCI V3/2009 Class A