Central and aggregating switchesВ Dell Networking Series ZВ provide the ideal degree of density, versatility and performance for shared and individual data centers.
Series ZВ consists of a large range of switches with distinct fixed form factors. They provide high performance for innovative capackers on resource loads, the devices from this series offer a resource-sensitive supply for the future needs of the data processing center..
The uniqueness of the switchesВ Dell Networking Series ZВ is not only to simplify management, but also to provide resources with the necessary flexibility. Thus, switches from this series are ahead of data processing needs, and do not react to their appearance, as their predecessors do..
With these switches, you can easily create any data center with the ability to connect up toВ 100В 000В servers. Models Z9100-ON and Z9264F-ON support up to 128 ports 10/25GbE.
Z-series switches provide scalable performance without special additional configurations. Unique Features of Dell Networking Series Switching Z:
- Multi-speed switches are equipped with portsВ Ethernet 10, 25, 40, 50 or 100GbEВ
- The Z9100-ON has a throughput of up to 6,4 Tbit/s, a Z9264F-ON — before 12,8 Tbit/with
- Incredibly low latency — less than a microsecond
- User-configurable tables for virtualized data centers
Specifications of switch Dell EMC Z9264F-ON:В
Ports
|
64 multi-rate port 100GbE
|
performance
|
4 200 million packets per second
|
routing
|
Layer Switching and Routing L2/L3
|
VLAN
|
VLAN tagging, dual network tagging VLAN, GVRP
|
multicast race Lka
|
Yes
|
Other switching options
|
Open Networking
|
Control
|
Command line interface SNMP API REST
|
Frame
|
Fixed number of ports, 2 stalls
|
Supported standards
|
IEEE — 802.1, 802.3 RFC — IP, IPv4, IPv6, RIP, OSPF, IS-IS, BGP, multicast race Lka, security, protocol Data Center Bridging network management
|
Operating conditions
|
Working temperature: from 0 В°C before 45 В°C (from 32 В°F before 113 В°F) Operating Humidity: from 10 to 90% (relative humidity), non-condensing
|
Nutrition
|
100–240 V AC, 50/60 Hz
|
Interference immunity
|
EN300 386 V1.4.1:2008 "EMC for network equipment", EN 55024: 1988 + A1: 2001 + A2: 2003, EN 61000-3-2: "Emissions of harmonic currents", EN 61000-3-3 "Voltage ripple and flicker", EN61000-4-2: ESD, EN 61000-4-3: "Resistance to radio frequency electromagnetic field", EN 61000-4-4: EFT, EN 61000-4-5: "Power surge", EN 61000-4-6: "Resistance to low-frequency conductive interference"
|
В
В
Log In