Switch Fortinet FSR-124D
7000 $
With 10 or 40 Gigabit Ethernet access ports and high bandwidth networks, data center switches FortiSwitch ideal for use as top-end server solutions or firewall aggregation. These high-speed switches are also great for use within a corporate network or in a backbone network..
Specifications switch Fortinet FSR-124D:
|
FSR-124D |
|
|
Ethernet Interface |
16x GE RJ45, 4x GE SFP slots, |
|
8 shared media interfaces (GE RJ45 / GE SFP slots) |
|
|
Console Interface |
DB9 connector |
|
Operating Mode |
Store and forward, L2/L3 wire-speed/non-blocking switching engine |
|
MAC Addresses |
8K |
|
Switching Capacity |
56 Gbps |
|
Packets Per Second |
83 Mpps |
|
VLANs Supported |
4K |
|
DRAM |
512 MB |
|
FLASH |
512 MB |
|
Speed |
10/100/1000 Mbps |
|
MDI/MDIX Auto-crossover |
Support straight or cross wired cables |
|
Auto-negotiating |
10/100/1000 Mbps speed auto-negotiation; Full and half duplex |
|
PoE+ (PSE) |
N/A |
|
Port Types Supported |
Gigabit fiber multimode, fiber single mode, fiber long-haul single mode 1000Base(SX/LX/ZX) |
|
Fiber Port Connector |
LC typically for fiber (depends on module) |
|
Power Input |
Redundant input terminals |
|
Input Voltage Range |
44–57V DC |
|
Switch Power |
25.434 W (Maximum) |
|
Heat Dissipation |
117.49 BTU/h |
|
Power Status Indication |
Indication of power input status |
|
PoE Indication |
N/A |
|
Ethernet Port Indication |
Link and speed |
|
Operating Temperature Range |
-40–185°F (-40–85°C) |
|
Storage Temperature Range |
-40–185°F (-40–85°C) |
|
Humidity |
10–95% non-condensing |
|
MTBF |
> 30 years |
|
Cooling |
Fanless |
|
Ingress Protection |
IP40 |
|
Installation Option |
Rack mount |
|
Length x Width x Height |
17.40 x 13.86 x 1.73 inches (442 x 352 x 44 mm) |
|
Weight |
12.78 lbs (5.80 kg) |
| condition | new |
|---|
Log In