Switch HPE FlexFabric JL586A

SKU
JL586A
Call for Price
EAN: 18317
Stock: available on order
Lead time: 25-35 days
GPL price:

22880 $

HPE 5710 48XGT 6QS+/2QS28 Switch.

Switch Series HPE Comware - These are turnkey networking solutions that support both traditional and evolving data center architectures..

Switching units of data centers based on HPE Comware!

Switch Models HPE Comware differentiate themselves from their predecessors by increased network performance, reliability and scalability in the data center, campuses and branch offices of various institutions.

The devices are based on a modular operating system Comware, these switches provide enterprise-class availability, they support complex EVPN-based deployments, and VXLAN and provide superior security with encryption MACsec.

Automated, multi-vendor and proactive network management!

As network management becomes more complex and the risks associated with a compromised data stream increase, switches not only provide increased performance, but also protect your personal data and information of your customers as much as possible.. 

HPE Intelligent Management Center (IMC) provides end-to-end management of multiple service providers at once across branch, campus, and data center networks, scaling to tens of thousands of devices. IMC converts junk network data into useful information to keep you running at the highest possible performance level.

Specifications switch Aruba (HPE) FlexFabric JL586A:

I/O ports and slots

48 1/10G SFP+ ports

6 x 40GbE ports or 3 x 40GbE ports and 1 x 100G port or 2 x 100GbE port

Additional ports and slots

Management ports: 1 10M/100M/1000MBASE-T copper port, 1 SFP port

Console ports: 1 mini USB console port, 1 serial console port

Power supplies

2  power supply slots

1 minimum power supply required (ordered separately).

Power supplies are hot swappable.

For 1:1 redundancy this system requires two same-type power supplies to function properly

Fan tray

5 fan tray slots

The customer must order fan trays, as they are not included with the switch. This system requires four same-direction airflow fan trays to function properly. A failed fan tray must be replaced immediately. Fans are hot swappable

Physical characteristics

Dimensions: 44 mm x 440 mm x 460 mm (1.73 in. x 17.32 in. x 18.11 in.) (1U height)

Weight: 10 kg (22.05 lb)

Memory and processor

1 GB  flash, 4 GB SDRAM; packet buffer size:  12 MB

Mounting and enclosure

Rack Mount 1U

Performance

10  Gbps Latency  (64-byte packets)

Throughput up to 1071 Mpps

Switching capacity: 1440 Gbps

Routing table size: 16K entries (IPv4), 8K entries (IPv6)

MAC address table size: 208K entries

ARP table Size: 68K (1K static)

Reliability

MTBF (years): 114.43

Environment

Operating temperature: 32°F to 113°F (0°C to 45°C)

Operating relative humidity: 10% to 90%, noncondensing

Acoustic: Low-speed fan:  52.4 dB; high-speed fan: 68.6 dB

Electrical characteristics

Frequency: 50/60 Hz

Maximum heat dissipation: 900 BTU/hr

Voltage: 100 - 240 VAC, rated

Maximum power rating: 100 VAC-240 VAC; Max. voltage: 264 VAC @ 50 Hz/60 Hz

Max. output power: 450W depending on PSU selected

Idle power: 108W

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1; AS/NZS 60950-1; CNS 14336-1

Emissions

VCCI Class A; EN 55032 Class A; ICES-003 Class A; AS/NZS CISPR 32 Class A; EN 61000-3-2; EN 61000-3-3;  FCC (CFR 47, Part 15) Class A; CISPR 32 Class A; CNS 13438; KN32; TCVN 7189; Anatel Resolution 442; ETSI EN 300-386

Immunity

ETSI  EN 300 386; EN 55024; KN35; CISPR 24

Management

IMC; CLI; out-of-band management; SNMP Manager; Telnet; FTP

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

 

Your Rating