Switch Series HPE Comware - These are turnkey networking solutions that support both traditional and evolving data center architectures..
Switching units of data centers based on HPE Comware!
Switch Models HPE Comware differentiate themselves from their predecessors by increased network performance, reliability and scalability in the data center, campuses and branch offices of various institutions.
The devices are based on a modular operating system Comware, these switches provide enterprise-class availability, they support complex EVPN-based deployments, and VXLAN and provide superior security with encryption MACsec.
Automated, multi-vendor and proactive network management!
As network management becomes more complex and the risks associated with a compromised data stream increase, switches not only provide increased performance, but also protect your personal data and information of your customers as much as possible..
HPE Intelligent Management Center (IMC) provides end-to-end management of multiple service providers at once across branch, campus, and data center networks, scaling to tens of thousands of devices. IMC converts junk network data into useful information to keep you running at the highest possible performance level.
Specifications switch Aruba (HPE) FlexFabric JQ075A:
|
I/O ports and slots
|
2 module slots
2 x 100G QSFP28 ports
Supports up to a maximum of 48 x 10/25GbE and 4 x 100GbE ports, or up to 16 x 100GbE ports
|
|
Additional ports and slots
|
1 x console port
1 x mini USB port
1 x USB port
2 x out-of-band management ports (one fiber port and one copper port)
|
|
Power supplies
|
2 power supply slots
1 minimum power supply required (ordered separately)
|
|
Fan tray
|
5 fan tray slots
The customer must order fan trays, as they are not included with the switch. This system requires same-direction airflow fan trays to function properly. The system should not be operated with with less than five fan trays for more than 24 hours. The system should not be operated without a fan tray for more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty.
|
|
Physical characteristics
|
Dimensions: 44.2 x 440 x 660 mm (1.74 x 17.32 x 25.98 in.)
Weight: 13.10 kg (28.88 lb) shipping weight
|
|
Memory and processor
|
1 GB flash; packet buffer size: 32 MB, 8 GB SDRAM
|
|
Mounting and enclosure
|
Rack Mount 1U
|
|
Performance
|
Latency < 1 µs (64-byte packets)
Throughput 2024 Mbpps
Routing/Switching capacity 3.6 Tbps
Routing table size 324K entries (IPv4), 162K entries (IPv6)
MAC address table size 288K entries
|
|
Environment
|
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative humidity 5% to 95%, noncondensing
Acoustic Low-speed fan: 70.8 dB, high-speed fan: 83.2dB
|
|
Electrical characteristics
|
requency 50/60 Hz
Maximum heat dissipation 1392 BTU/hr (1458 kJ/hr)
Voltage 100 VAC to 240 VAC V rated, 90 VAC to 264 VAC max.., -40 VDC to -60 VDC rated, -40 VDC to -72 VDC max.
Maximum power rating 650 W
Idle power 136 W
|
|
Safety
|
UL 60950-1, CAN/CSA C22.2 No 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 60950-1, FDA 21 CFR Subchapter J
|
|
Emissions
|
FCC Part 15 (CFR 47) CLASS A, ICES-003 CLASS A, VCCI CLASS A, CISPR 32 CLASS A , EN 55032 CLASS A, AS/NZS CISPR32 CLASS A, EN 61000-3-2, EN 61000-3-3, ETSI EN 300 386
|
|
Immunity
|
CISPR 24, EN 55024, ETSI EN 300 386
|
|
Management
|
IMC; CLI; out-of-band management; SNMP Manager; Telnet; FTP
|
|
Services
|
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.
|
Log In