Switch Series HPE Comware - These are turnkey networking solutions that support both traditional and evolving data center architectures..
Switching units of data centers based on HPE Comware!
Switch Models HPE Comware differentiate themselves from their predecessors by increased network performance, reliability and scalability in the data center, campuses and branch offices of various institutions.
The devices are based on a modular operating system Comware, these switches provide enterprise-class availability, they support complex EVPN-based deployments, and VXLAN and provide superior security with encryption MACsec.
Automated, multi-vendor and proactive network management!
As network management becomes more complex and the risks associated with a compromised data stream increase, switches not only provide increased performance, but also protect your personal data and information of your customers as much as possible..
HPE Intelligent Management Center (IMC) provides end-to-end management of multiple service providers at once across branch, campus, and data center networks, scaling to tens of thousands of devices. IMC converts junk network data into useful information to keep you running at the highest possible performance level.
Specifications switch Aruba (HPE) FlexNetwork JL829A:
Datasheet JL829A
|
Specifications
|
I/O ports and slots
|
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
|
4 SFP+ fixed 1000/10000 SFP+ ports
|
Additional ports and slots
|
1 RJ-45 serial console port
|
Physical characteristics
|
Dimensions
|
17.32(w) x 9.04(d) x 1.72(h) in (44 x 23 x 4.36 cm) (1U height)
|
Weight
|
7.72 lb (3.5 kg)
|
Memory and processor
|
512 MB SDRAM, 256 MB flash
|
Mounting and enclosure
|
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
|
Performance
|
1000 Mb Latency
|
< 5 µs
|
10 Gbps Latency
|
< 3 µs
|
Throughput
|
132 Mpps
|
Routing/Switching capacity
|
176 Gbps
|
Routing table size
|
512 entries (IPv4), 256 entries (IPv6)
|
MAC address table size
|
16384 entries
|
Environment
|
Operating temperature
|
23°F to 113°F (-5°C to 45°C)
|
Operating relative humidity
|
10% to 90%, noncondensing
|
Non-operating/Storage temperature
|
-40°F to 158°F (-40°C to 70°C)
|
Non-operating/Storage relative humidity
|
5% to 95%, noncondensing
|
Acoustic
|
Low-speed fan: 42.2 dB, High-speed fan: 49.3 dB; ISO 7779
|
Electrical characteristics
|
Frequency
|
50/60 Hz
|
Maximum heat dissipation
|
130/153 BTU/hr (137.15/161.42 kJ/hr), For AC powered units. For DC powered units heat dissipation is 130 BTU/hr min, 171 BTU/hr max
|
Voltage
|
100 - 240 VAC
-48 to -60 VDC
|
Current
|
10 A
|
Maximum power rating
|
44 W
|
Idle power
|
38 W
|
Notes:
|
- Idle power is the actual power consumption of the device with no ports connected.
- Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
- Power ratings for AC power indicated above. Current used is 5A Max when DC Power used. For DC input power, idle power is 38W, maximum DC power used is 50W.
- When supplemented with the use of an HPE RPS1600 or RPS 800 Redundant Power System, up to 54 W of DC power can be supplied. DC input voltage range is -48 to -60 VDC. Total DC input power is 36 W typical and 54 W maximum. DC input voltage range is -48 VDC to -60 VDC. DC input source is the HPE RPS1600 or RPS 800.
|
Safety
|
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance
|
Emissions
|
FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993
|
Immunity
|
Generic
|
EN 55024
|
ESD
|
EN300 386
|
Management
|
IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager
|
Log In