Switch Huawei CE8860-4C-EI-F

Item

CE8860-4C-EI

Ports

4 slots, different cards can be flexibly used in combinations to achieve a maximum of:

32 x 100 GE QSFP28 or

64 x 40 GE QSFP+ or

128 x 25 GE SFP28 or

128 x 10 GE SFP+ ports

Dimensions (W x D x H)

442 mm x 600 mm x 88.1 mm

Weight (fully loaded)

21.2 kg (46.7 lb)

Operating Voltage

Rated voltage: 100V AC to 240V AC, 50 Hz to 60 Hz

Maximum voltage: 90V DC to 290V AC, 47 Hz to 63 Hz

240V high-voltage DC power voltage: 188V to 290V DC

380V high-voltage DC rated voltage: 240V to 380V DC

380V high-voltage DC maximum voltage: 188V to 400V DC

Maximum Power Consumption

750W

Switching Capacity

6.4 Tbit/s

Forwarding Performance

3,200 Mpps

Airflow Design

Front-to-back or back-to-front

Network Virtualization

VXLAN routing and bridging

BGP-EVPN

TRILL

QinQ access VXLAN

IPv6 over VXLAN

SDN

Agile Controller

VMware NSX

Network Convergence

FCoE

DCBX, PFC, ETS

Programmability

OPS

CE modules for Ansible released on open source websites

Traffic Analysis

NetStream

sFlow

VLAN

Adding access, trunk, and hybrid interfaces to VLANs

Default VLAN

QinQ

MUX VLAN

GVRP

ACL

Ingress: 2,000; Egress: 1,000

MAC Address Table

Maximum: 136k

Dynamic learning and aging of MAC addresses

Static, dynamic, and black hole MAC address entries

Packet filtering based on source MAC addresses

MAC address limiting based on ports and VLANs

ARP

Maximum: 84k

IPv4 FIB

Maximum: 128k

IP Routing

IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+

IPv6 FIB

Maximum: 64k

ND

Maximum: 32k

IPv6

IPv6 Neighbor Discovery (ND)

Path MTU Discovery (PMTU)

TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6

Multicast FIB

Maximum: 8k

Multicast

IGMP, PIM-SM, PIM-DM, MSDP, and MBGP

IGMP snooping

IGMP proxy

Fast leave of multicast member interfaces

Multicast traffic suppression

Multicast VLAN

MPLS

MPLS

Reliability

LACP

STP, RSTP, VBST, and MSTP

BPDU protection, root protection, and loop protection

Smart Link and multi-instance

DLDP

ERPS (G.8032)

VRRP, VRRP load balancing, and BFD for VRRP

BFD for BGP/IS-IS/OSPF/Static route

QoS

Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority

Actions of ACL, CAR, re-marking, and scheduling

Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR

Congestion avoidance mechanisms, including WRED and tail drop

Traffic shaping

Configuration and Maintenance

Console, Telnet, and SSH terminals

Network management protocols, such as SNMP v1/v2c/v3

File upload and download through FTP and TFTP

BootROM upgrade and remote upgrade

802.3az Energy Efficient Ethernet (EEE)

Hot patches

User operation logs

Zero-Touch Provisioning (ZTP)

Security and Management

802.1x authentication

Command line authority control based on user levels, preventing unauthorized users from using commands

DoS, ARP, and ICMP attack defenses

Port isolation, port security, and sticky MAC

Binding of the IP address, MAC address, interface and VLAN

Authentication methods, including AAA, RADIUS, and HWTACACS

Remote Network Monitoring (RMON)

Environment Parameters

Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)

Storage temperature: -40°C to 70°C (-40°F to 158°F)

Relative humidity: 5% RH to 95% RH, non-condensing