Switches Juniper QFX5110 Series – is a family of adaptive, feature rich, high performance, low latency, L2 and L3 switches optimized for virtualized data center environments. Switches QFX5110 are versatile building blocks for a variety of factory architectures, including mixed architectures Juniper 1/10/40/100GbE, virtual chassis, virtual chassis factories and QFabric, as well as open architectures such as tree and level factories 3. All switches QFX5110 support software update in working mode (ISSU), which ensures the constant operation of the data center.
Switches QFX5110 support virtualized network environments, including Juniper Contrail and gateway services VMware NSX L2.
Series Switch Performance Juniper QFX5110 reaches 2,56 Tbit/s, and throughput up to 1.44 billion pct/with.
Ability to use 100GbE switch ports QFX5110 Provides additional flexibility. In converged server access environments at the network edge QFX5110 can also serve as a standard transit switch FCoE, which provides protection for investments in existing data center aggregation infrastructures and storage networks (SAN) Fibre Channel.
Switch line Juniper QFX5110 includes various interface and line cards and modules, optical transceivers, additional licenses and upgrades. Like many devices Juniper, QFX5110 runs under the operating system Junos.
Specifications of switch Juniper QFX5110-32Q-AFO:
|
Dimensions (W x H x D)
|
QFX5110-32Q: 17.36 x 1.72 x 20.48 in (44.09 x 4.37 x 52.02 cm); 1 U
|
|
Power Options
|
100 to 240 VAC (single phase) at 50/60 Hz or –36 to –72 VDC
|
|
System Throughput
|
QFX5110-32Q: 2.56 Tbps
|
|
Form Factor
|
Fixed-configuration platform
|
|
Data Rate (switching capacity)
|
QFX5110-32Q: 1.44 Bpps
|
|
Port Densities
|
QFX5110-32Q: 104 10GbE (with breakout cable); 32 40GbE; 20 40GbE with 4 100GbE
|
|
Maximum 10GbE Density
|
QFX5110-32Q: 104 ports with breakout cable
|
|
Maximum 25GbE/50GbE Densities
|
N/A
|
|
Maximum 40GbE Density
|
QFX5110-32Q: 32 ports
|
|
Maximum 100GbE Density
|
QFX5110-48S/-32Q: 4
|
|
Resiliency
|
Dual hot-swappable AC or DC power supplies for 1+1 redundancy.
Hot-swappable fan trays.
|
|
Power Consumption
|
QFX5110-32Q: 300W; idle load: 200W
|
|
Overlay Services
|
Contrail Layer 3 gateway (roadmap)
VMware NSX Layer 2 gateway (roadmap)
|
|
Traffic Monitoring
|
Port-based
LAG port
VLAN-based
Access control list (ACL)-based
Mirror to local and remote destinations (Layer 2 over VLAN)
|
|
QoS Queues / Port
|
12 (8 unicast; 4 multicast)
|
|
MAC Addresses
|
288,000
|
|
Jumbo Frames
|
9,216 Bytes
|
|
IPv4 Hosts
|
144,000
|
|
IPv4 Unicast Routes
|
208,000
|
|
IPv4 Multicast Routes
|
104,000
|
|
IPv6 Hosts
|
72,000
|
|
IPv6 Unicast Routes
|
104,000
|
|
IPv6 Multicast Routes
|
52,000
|
|
Number of VLANs
|
4,096
|
|
ARP Entries
|
48,000
|
Log In