Switch Ruckus ICX7150-48ZP-E2X10G
6150 $
Switches Ruckus Series ICX7150 - These are enterprise-class switches designed for SMBs, small offices, branch offices, distributed campuses and are recommended by the vendor for deployment with wireless products Ruckus.
The youngest model Ruckus ICX 7150-C12P is a compact class switch, all 12 ports support PoE/PoE+ from PoE budgets to 124 W>. The switch is equipped with Uplink interfaces 2x10/100/1000 and 2x1/10GbE SFP/SFP+(Uplink/Stacking). This switch supports all the features of older models (stacking and L3).
older models Ruckus ICX 7150 have 24 or 48 ports. All models are equipped with 4x10Gb optical ports that can be used for both uplink connections and stacking.
Series ICX 7150 designed to gradually replace ICX 6450 / 6430 and unlike its predecessors has more modern hardware and software.
Switch Specifications Ruckus ICX7150 (ICX7150-48ZP-E2X10G):
|
Included Accessories |
Rubber feet |
|
Cables Included |
1 x console cable |
|
Rack Mounting Kit |
Included |
|
MTBF |
104,626 hours |
|
Compliant Standards |
Plug and Play, EN 61000-3-2, EN50081-1, ICES-003, EN 61000-3-3, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, WEEE, RoHS, EN 61000-6-3, FCC Part 15 A, CAN/CSA C22.2 No. 60950-1-07, EN 60825-2, IEC 60950-1 Second Edition, VCCI Class A, EN 60950-1:2006, IEC 68-2-6, AS/NZS 55022, IEC 68-2-36, EN 55022/CISPR 22 Class A, IEC 68-2-32 |
|
Localization |
United States |
|
Width |
17.3 in |
|
Depth |
13.1 in |
|
Height |
1.7 in |
|
Weight |
14.57 lbs |
|
Min Operating Temperature |
23 °F |
|
Max Operating Temperature |
113 °F |
|
Humidity Range Operating |
5 - 95% (non-condensing) |
|
Min Storage Temperature |
-13 °F |
|
Max Storage Temperature |
158 °F |
|
Humidity Range Storage |
0 - 95% (non-condensing) |
|
Device Type |
Switch - 48 ports - managed - stackable |
|
Enclosure Type |
Rack-mountable 1U |
|
Subtype |
2.5 Gigabit Ethernet |
|
Ports |
16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 6 x Gigabit SFP (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) |
|
Power Over Ethernet (PoE) |
PoH / PoE+ |
|
Processor |
1 |
|
PoE Budget |
740 W |
|
Performance |
Switching capacity (full duplex): 304 Gbps ¦ Forwarding performance (full duplex): 226 Mbps ¦ Aggregate stacking bandwidth: 480 Gbps |
|
Capacity |
Switches in a stack: 12 ¦ MAC addresses: 16384 ¦ VLANs supported: 4095 ¦ PVLANs supported: 32 ¦ STP instances: 254 ¦ ARP entries: 4094 ¦ IPv6 routes: 1000 ¦ IPv4 routes: 1000 ¦ Next hop address: 4094 ¦ Trunk groups: 128 ¦ Ports per trunk group: 16 ¦ Jumbo frame size: 9216 ¦ QoS priority queues per port: 8 ¦ Layer 2 multicast groups: 3072 ¦ Layer 3 multicast groups: 2048 ¦ Port Extenders (PE) per fabric: 36 ¦ Port Extender (PE) cascade depth (units): up to 6 |
|
Jumbo Frame Support |
Yes |
|
Routing Protocol |
RIP, RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, ECMP |
|
Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, NTP |
|
Encryption Algorithm |
AES |
|
Authentication Method |
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
|
Features |
Flow control, layer 2 switching, auto-sensing per device, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, firmware upgradable, SNTP support, DDos attack prevention, Metro Ring Protocol (MRP) support, sFlow, Per-VLAN Spanning Tree (PVST), PIM-SM snooping, Remote Fault Notification (RFN), IP Precedence, SSH support, Jumbo Frames support, MLD snooping, PoE+, Trusted Platform Module (TPM), front to back airflow, Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), IPv4 support, hot swappable dual fans, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, Dynamic VLAN Support (GVRP), Class of Service (CoS), Strict Priority (SP), Generic Attribute Registration Protocol (GARP), IGMP proxy, redundant fans, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, hot swappable power supply, OpenFlow support, Extended Fabric, power over HDBaseT (PoH), rate limit, AES encryption, MAC address learning, MAC address authentication, Authentication, Authorization and Accounting (AAA), Static Link Aggregation, VLAN Double Tagging (Q-in-Q), Root Guard, VLAN mirroring, Private VLAN, IGMP fast leave, STP BPDU Guard, MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, VLAN Tagging, MAC address mapping |
|
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.1AX, IEEE 802.1BR, IEEE 802.3bz |
|
RAM |
1 GB |
|
Flash Memory |
2 GB |
|
Status Indicators |
Power, status |
|
Interfaces |
16 x 100/1000/2.5G RJ-45 PoH - 15.4 W ¦ 32 x 10/100/1000 Base-T RJ-45 PoE+ ¦ 6 x Gigabit LAN SFP ¦ 2 x 10Gbit LAN SFP+ ¦ 1 x management (LAN) RJ-45 ¦ 1 x console (USB) Type C management ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB Type A |
|
Power Device |
Internal power supply - hot-plug |
|
Installed Qty |
1 (installed) / 2 (max) |
|
Power Redundancy |
Optional |
|
Power Redundancy Scheme |
1+1 (with optional power supply) |
|
Power Provided |
920 Watt |
|
Voltage Required |
AC 120/230 V (50/60 Hz) |
| condition | new |
|---|
Log In