Switches Cisco Catalyst 2960 PlusВ - these are controlled devices of the second level of switching (L2 layer), fixed-configuration, provide a wider range of security and quality of service functions, as well as bandwidth management, which is directly aimed at replacing switchesВ Catalyst 2960В with ports 10/100 previous functionality.
Switches Cisco Catalyst 2960-PlusВ support Intelligent featuresВ (creation of complex access control lists, advanced security), toMbinated gigabit uplinks (copper 10/100/1000BASE-T Ethernet or SFP-module to move to another environment - Cisco 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX, 100BASE-FX, 100BASE-LX, CWDM SFP). Also, devices Catalyst 2960-PlusВ supportВ QoS,В step by step Rate Limiting, ACLВ (On the base MAC or IP addresses, ports UDP/ TCP) andВ multicast services, the ability to adjust the transmission speed on each port in increments 64 Kbit, Link AggregationВ for organizing faster connections between switches and servers, the ability to organize trunk connections on each port using tags 802.1q, before 255 VLAN to the switch, up to 4000 VLAN ID and management throughВ Cisco Network AssistantВ (supports a wide range of switch models from Cisco Catalyst 2960 before Cisco Catalyst 4506).
Firmware switchesВ CiscoВ Catalyst 2960-Plus released in imagesВ LAN Base and Lan Lite Image. LAN Base has wider functionality, including improved security (ACLs), DHCP Snooping and additional access control features - Web authentication and extensions 802.1x, additional options for QoS settings QoS, redundant power support RPS and a large number SFP-ports. Functions Flex Links and Link State Tracking, Increased supported VLANs (before 256), IPv6 Host, MLD Snooping, LLDP-MED, RSPAN, MVR, DHCP Option 82, and IP SLA (responder) And so on.
Specifications of switch Cisco WS-C2960+24TC-S:
Manufacturer:
|
Cisco
|
Product ID:
|
WS-C2960+24TC-S
|
Product Description:
|
NEW!! Cisco Catalyst 2960 Plus 24 10/100 + 2 T/SFP LAN Lite
|
Product Type:
|
Ethernet Switch
|
Interfaces/Ports
|
Total Number of Network Ports:
|
24
|
Uplink Port:
|
Yes
|
Number of Network (RJ-45) Ports:
|
24
|
Port/Expansion Slot Details:
|
24 x Fast Ethernet Network
|
В
|
2 x Gigabit Ethernet Uplink
|
В
|
2 x Gigabit Ethernet Expansion Slot
|
Media & Performance
|
Media Type Supported:
|
Twisted Pair
|
Twisted Pair Cable Standard:
|
Category 5
|
Ethernet Technology:
|
Fast Ethernet
|
Network Technology:
|
10Base-T
|
В
|
100/1000Base-T
|
I/O Expansions
|
Number of Total Expansion Slots:
|
2
|
Expansion Slot Type:
|
SFP
|
Number of SFP Slots:
|
2
|
Network & Communication
|
Layer Supported:
|
2
|
Management & Protocols
|
Manageable:
|
Yes
|
Management:
|
- CLI
- Syslog
- DHCP
- SNMPv1, v2c, and v3
- Telnet
- Web browser
- Express Setup
- Cisco Network Assistant
- IEEE 802.1p QoS
- IEEE 802.1Q VLAN
- RMON (history, statistics, alarms, and events)
- CiscoWorks LAN Management Solution
- Cisco Identity-Based Networking Services
|
Memory
|
Standard Memory:
|
64 MB
|
Memory Technology:
|
DRAM
|
Flash Memory:
|
32 MB
|
Power Description
|
Input Voltage:
|
110 V AC
|
В
|
220 V AC
|
Power Source:
|
Power Supply
|
Physical Characteristics
|
Height:
|
1.7"
|
Width:
|
17.5"
|
Depth:
|
9.3"
|
Weight (Approximate):
|
8 lb
|
Miscellaneous
|
Package Contents:
|
- Catalyst 2960-24TC-S Managed Ethernet Switch
- Catalyst 2960 Switch Getting Started Guide
- Regulatory Compliance and Safety Information for the Catalyst 2960 Switch
- AC power cord
- 1 x RJ-45-to-DB-9 adapter cable
- Mounting kit that contains:
- 4 x Rubber feet for mounting the switch on a table
- 2 x 19-inch rack-mounting brackets (also used for wall mounting)
- 6 x Phillips flat-head screws for attaching the brackets to the switch
- 4 x Phillips machine screws for attaching the brackets to a rack
- 1 x Cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets
- 1 x Redundant power system (RPS) connector cover
- 2 x Phillips pan-head screws (for attaching the RPS cover)
- 4 x Phillips truss-head screws (for wall-mounting brackets)
|
Log In